Pencahayaan Area Berbahaya
Explosion-proof, low-glare lighting designed for classified zones and their surroundings. Kami memetakan Zone/Class boundaries and design to EN 12464-2 untuk area kerja di luar ruangan, EN 13201 / IES RP-8 for roads and yards, IES G-1 untuk pengenalan CCTV, dan BUG TM-15 to limit glare and spill. Neutral-white CCT (≈4000 K) with CRI ≥80 supports visibility and monitoring. For classified areas, we select explosion-proof components; for non-classified adjacent zones, robust AC LED floods and street lights deliver uniform, efficient illumination.
Pertimbangan Utama
Zone/Class First
Design levels and equipment by hazardous Zone/Class maps, not by area size alone.
Standards Mapping
EN 12464-2 for outdoor work areas; EN 13201 / IES RP-8 for roads/parking; IES G-1 for CCTV; BUG TM-15 for glare/spill limits.
Explosion-Proof Selection
Match luminaire and enclosures to the required ATEX/IECEx category and gas/dust group.
Wiring & Glands
Use certified boxes, glands, and conduit with documented ingress/impact ratings.
Uniformity Before Peaks
Target practical U₀/Uᵢ ratios to remove dark corners and flare-induced shadows.
Vertical/Semicylindrical Illuminance
Provide recognition-grade vertical light at gates, racks, and camera corridors.
CCT & CRI Policy
Neutral white (≈4000 K) with CRI ≥80 balances recognition and comfort in industrial tasks.
Pengendalian Silau & Tumpahan
Use cut-off optics, visors, and low-tilt aiming to protect workers and neighbors (BUG/TM-15).
Durability & Protection
Specify IP66/IK09+ housings, corrosion protection, surge protection, and anti-theft hardware.
Power Strategy
Explosion-proof solar inside/near classified zones; LED AC for non-classified perimeters and roads—both with smart curfews.
Prinsip Desain
Tetap Fokus pada Tugas
Aiming and optics confine light to bays, racks, and walkways—never into eyes or sky.
Bahkan Garis Penglihatan
Pole rhythm and gradients avoid glare, shadow pockets, and fog/steam washout.
Low-Tilt Aiming
Cap ULOR and high-angle intensity while maintaining vertical light for CCTV.
Serviceable & Documented
Tool-less access, spare kits, and traceable certificates for each SKU/configuration.
Kontrol Berbasis Adegan
Presets for operations, inspection, and egress; motion boost at curfew.
Corrosion Mindset
Marine/chemical coatings and stainless hardware where exposure demands it.
Safe Area Transitions
Step down from EX fixtures to standard LED where the classification ends.
Life-Cycle ROI
Controls + autonomy sizing reduce OPEX and truck rolls.
Solusi berdasarkan Skenario
Loading Racks (Truck/Rail)
Recognition-grade vertical light with glare caps for hose/valve work and plates.
Fueling Bays & LPG Stations
Explosion-proof luminaires near dispensers; low-tilt optics to cut veiling luminance.
Tank Farms & Bund Walls
Long-throw cut-off light for catwalks and gauging without lighting tank tops.
Process Units & Pipe Racks
Shielded optics for cable trays and valves; documented gland/box methods.
Gatehouses & ID Lanes
Vertical/semicylindrical targets for faces and plates with CCTV.
Perimeter Fence Lines
Cut-off distributions for detection without spill into neighbors.
Access Roads & Yards (Non-Classified)
EN 13201/RP-8 class-based road/area lighting with safe uniformity.
Temporary Turnarounds & Outages
Portable solar/tower options for rapid, trench-free coverage.
Apa yang Anda Dapatkan
- Tata letak fotometrik with average/vertical illuminance, uniformity and BUG/TM-15 checks mapped to EN 12464-2 / EN 13201 / IES RP-8 / IES G-1.
- Zone/Class mapping against owner’s hazardous-area drawings; bill of explosion-proof components and wiring method.
- Pole/optics/aiming schedule（heights, offsets, EPA/wind, foundations, corrosion notes）.
- Controls & curfew plan（scenes, sensors, overrides；solar autonomy sizing where applicable）.
- BOM & pengiriman（datasheets, certificates/references, IES files, warranties, install drawings）.
- Catatan kepatuhan linking international standards to local regulations.
Recommended Products
Tahan Ledakan
Specialized system for hazardous locations (oil & gas, chemical zones) using protected enclosures and dedicated routing; engineered to reduce ignition risk and support compliance workflows. Before model selection, send the owner-issued area-classification drawing, site layout, operating requirements and supply scope. Review the exact proposed configuration and applicable certificate scope before confirming suitability; a general product-family description is not approval for a particular classified location.