إضاءة المناطق الخطرة
Explosion-proof, low-glare lighting designed for classified zones and their surroundings. نحن نرسم خريطة Zone/Class boundaries and design to EN 12464-2 لمناطق العمل الخارجية, EN 13201 / IIS RP-8 for roads and yards, IES G-1 للتعرف على الدوائر التلفزيونية المغلقة، و باغ TM-15 to limit glare and spill. Neutral-white CCT (≈4000 K) with CRI ≥80 supports visibility and monitoring. For classified areas, we select explosion-proof components; for non-classified adjacent zones, robust AC LED floods and street lights deliver uniform, efficient illumination.
الاعتبارات الرئيسية
Zone/Class First
Design levels and equipment by hazardous Zone/Class maps, not by area size alone.
تخطيط المعايير
EN 12464-2 for outdoor work areas; EN 13201 / IIS RP-8 for roads/parking; IES G-1 for CCTV; باغ TM-15 for glare/spill limits.
Explosion-Proof Selection
Match luminaire and enclosures to the required ATEX/IECEx category and gas/dust group.
Wiring & Glands
Use certified boxes, glands, and conduit with documented ingress/impact ratings.
Uniformity Before Peaks
Target practical U₀/Uᵢ ratios to remove dark corners and flare-induced shadows.
إضاءة رأسية/سيميليندية، إضاءة رأسية/سيميليندية
Provide recognition-grade vertical light at gates, racks, and camera corridors.
سياسة CCT و CRI
Neutral white (≈4000 K) with CRI ≥80 balances recognition and comfort in industrial tasks.
التحكم في الوهج والانسكاب
Use cut-off optics, visors, and low-tilt aiming to protect workers and neighbors (BUG/TM-15).
المتانة والحماية
Specify IP66/IK09+ housings, corrosion protection, surge protection, and anti-theft hardware.
استراتيجية الطاقة
Explosion-proof solar inside/near classified zones; صمام التيار المتردد for non-classified perimeters and roads—both with smart curfews.
مبادئ التصميم
إبقاء الضوء على المهمة
Aiming and optics confine light to bays, racks, and walkways—never into eyes or sky.
خطوط رؤية متساوية
Pole rhythm and gradients avoid glare, shadow pockets, and fog/steam washout.
التصويب بالإمالة المنخفضة
Cap ULOR and high-angle intensity while maintaining vertical light for CCTV.
Serviceable & Documented
Tool-less access, spare kits, and traceable certificates for each SKU/configuration.
عناصر التحكم المستندة إلى المشهد
Presets for operations, inspection, and egress; motion boost at curfew.
Corrosion Mindset
Marine/chemical coatings and stainless hardware where exposure demands it.
Safe Area Transitions
Step down from EX fixtures to standard LED where the classification ends.
Life-Cycle ROI
Controls + autonomy sizing reduce OPEX and truck rolls.
الحلول حسب السيناريو
Loading Racks (Truck/Rail)
Recognition-grade vertical light with glare caps for hose/valve work and plates.
Fueling Bays & LPG Stations
Explosion-proof luminaires near dispensers; low-tilt optics to cut veiling luminance.
Tank Farms & Bund Walls
Long-throw cut-off light for catwalks and gauging without lighting tank tops.
Process Units & Pipe Racks
Shielded optics for cable trays and valves; documented gland/box methods.
Gatehouses & ID Lanes
Vertical/semicylindrical targets for faces and plates with CCTV.
Perimeter Fence Lines
Cut-off distributions for detection without spill into neighbors.
Access Roads & Yards (Non-Classified)
EN 13201/RP-8 class-based road/area lighting with safe uniformity.
Temporary Turnarounds & Outages
Portable solar/tower options for rapid, trench-free coverage.
ما تحصل عليه
- تخطيط ضوئي with average/vertical illuminance, uniformity and BUG/TM-15 الشيكات المعينة إلى إن 12464-2 / إن 13201 / إن 13201 / إيزو RP-8 / إيزو G-1.
- Zone/Class mapping against owner’s hazardous-area drawings; bill of explosion-proof components and wiring method.
- Pole/optics/aiming schedule（heights, offsets, EPA/wind, foundations, corrosion notes）.
- خطة الضوابط وحظر التجول（scenes, sensors, overrides；solar autonomy sizing where applicable）.
- قائمة المواد والعروض المقدمة（datasheets, certificates/references, IES files, warranties, install drawings）.
- ملاحظات الامتثال linking international standards to local regulations.
المنتجات الموصى بها
مقاوم للانفجار
Specialized system for hazardous locations (oil & gas, chemical zones) using protected enclosures and dedicated routing; engineered to reduce ignition risk and support compliance workflows. Before model selection, send the owner-issued area-classification drawing, site layout, operating requirements and supply scope. Review the exact proposed configuration and applicable certificate scope before confirming suitability; a general product-family description is not approval for a particular classified location.