Highway Lighting for Solar and LED Roadway Projects
Highway lighting decisions begin with road geometry, operating conditions and the authority’s design criteria—not a universal wattage or pole height. Inlux prepares solar and grid-fed LED concepts for continuous road sections, interchanges, ramps, toll areas and other conflict zones. Send a marked alignment, lane and median dimensions, speed and traffic context, required calculation method, local criteria, pole constraints, control schedule, energy source and supply boundary. We can then return a preliminary layout and quotation basis; final acceptance remains subject to the project specification and authority having jurisdiction.
Highway Lighting: What to Send for a Layout
A highway lighting quote should make its assumptions visible. A fixture wattage, pole height or battery capacity by itself cannot establish road coverage, glare control, structural suitability or all-night energy balance.
| Masukan | What to provide | Why it changes the proposal |
|---|---|---|
| Road zones | Continuous sections, interchanges, ramps, toll areas, bridges, crossings, shoulders and service roads | Separates calculation areas and conflict zones |
| Geometry | Alignment, lane and median widths, curves, grades, setbacks, mounting sides and existing pole coordinates | Changes spacing, distribution, aiming and pole location |
| Design basis | Authority, road class, calculation method, maintained criteria, uniformity, glare and spill limits | Defines the photometric pass/fail basis |
| Operating context | Speed, traffic mix, pedestrian/cyclist conflict, ambient light and critical detection tasks | Prevents one criterion being applied to unlike zones |
| Power architecture | Grid availability, outage objective, trenching limits and whether solar, LED, hybrid or high mast may be considered | Sets the valid system options and supply boundary |
| Solar inputs | Coordinates, shading, longest-night schedule, dimming profile, required autonomy and usable-battery basis | Supports PV and storage sizing instead of a nominal-watt comparison |
| Structure and environment | Wind/corrosion conditions, mounting limits, clear zone, foundation responsibility and maintenance access | Changes pole, arm, foundation and service assumptions |
| Commercial brief | Quantity, destination, Incoterm, delivery date, installation scope, required files and acceptance process | Makes supplier quotations comparable |
The U.S. Department of Energy’s Model Specification for LED Roadway Luminaires is a useful procurement reference for product bid documents. Its Exterior Lighting Controls Guidance helps frame schedules, photocells and occupancy-responsive controls. These references do not replace the signed project specification or local authority requirements.
Compare commercial solar street light systems, LED street lights dan penerangan tiang tinggi tenaga surya. Municipal teams can also review the municipal solar street-light planning guide. When the brief is ready, send the road plan for a highway lighting RFQ.
Highway Lighting Design Inputs
Standards-led design
Use the calculation method and performance criteria named by the project authority. Record the road class, grids, maintenance assumptions, uniformity and glare metrics in the report; curves and conflict areas may require a different assessment from uninterrupted carriageway segments.
Uniformity & glare control
Report the specified uniformity and glare metric using the named calculation method; do not claim a pass until the authority’s criteria, maintenance assumptions and final photometric file are confirmed.
Optics for carriageways
Roadway distributions tailored to lane count, median, and shoulder.
Mounting geometry — evaluate pole height, arm, setback, median or roadside location, clear-zone constraints and spacing with the selected photometric file and structural brief.
Conflict areas
Treat interchanges, toll areas, ramps and crossings as separate conflict zones. Compare conventional poles and high mast only after visibility tasks, glare, spill, maintenance access and structural constraints are defined.
Highway Lighting by Road Zone
Continuous Mainline
Luminance-based layouts, long spacing, low glare, smart dimming profiles.
Interchanges & Toll Plazas
High-mast lighting with multi-fixture rings for large areas and minimal poles.
Curves, Ramps & Hilly Segments
Illuminance-based calculation with tighter spacing and tailored distributions.
Solar Highway Lighting
Off-grid systems with LiFePO₄, MPPT and adaptive dimming for energy autonomy.
Highway Lighting Submittals
- Photometric layout using the project-named method, criteria, assumptions and final IES/LDT file
- File fotometrik (IES/LDT) + laporan perhitungan
- Quoted drawing package and supply boundary; foundation, electrical and professionally sealed deliverables must be defined by jurisdiction and contract
- BOM dengan opsi (LED vs Solar, ketinggian tiang, optik)
- Daftar periksa O&M, garansi, dan penerimaan
Solar Highway Lights and System Options
JAGUAR (INL-AIT5)
All-in-two architecture for projects that need separate PV orientation from the luminaire. Confirm the quoted order code, photometry, battery, controller, mounting and environmental ratings before including it in a highway lighting layout.
SIRIUS (INL-AIO9)
High-output AIO9 with adjustable head, Type II/III optics, 7070 LEDs and LiFePO4—built for two-way roads and highways.
Baterai Lithium APOLLO
Sistem tipe terpisah dengan penyimpanan LiFePO4, 5050 LED, telemetri gerak/pintar opsional; panel fleksibel dan sudut lampu untuk memaksimalkan hasil dan cakupan untuk jalan, jalan setapak, dan tempat parkir.
Hibrida AC Tenaga Surya
Solar-first architecture with AC backup when the project defines the changeover logic, available supply and operating schedule. Nightly performance remains subject to the approved energy model, controls and installation conditions.
Hibrida Angin Surya
Combines PV and wind inputs where measured resource data and the project energy model justify both sources. Confirm turbine, controller, storage, structure, noise and maintenance scope before selection.
Baterai Gel MARS
Sistem tipe terpisah menggunakan baterai gel yang tahan lama; orientasi PV terpisah untuk pengisian daya yang lebih kuat, akses servis yang mudah, dan otonomi malam hari yang dapat diandalkan untuk jalan kota dan area komunitas.
LED Highway Street Lights
INL-LED25 - Lampu Jalan LED
Paket 100-200 W, optik jalan raya, dan driver yang siap kontrol untuk jalan utama dan kolektor.
INL-LED24 - Lampu Jalan LED
50-200 W dengan optik Tipe II/III/V yang presisi; layanan tanpa alat dan opsi SPD untuk kota.
INL-LED23 - Lampu Jalan LED
Kisaran output tinggi 50-240 W untuk jarak yang lebih lebar; beberapa dudukan lengan/penyangga slip.
INL-LED22 - Lampu Jalan LED
Platform serbaguna 60-200 W dengan opsi distribusi dan kontrol jalan raya.
INL-LED13 - Lampu Jalan LED
60-200 W dengan housing die-cast yang tahan lama dan peringkat IP/IK untuk jalanan dan lahan perkotaan.