Pencahayaan Kem Pelarian

Laman Utama / Pencahayaan Kem Pelarian

Pencahayaan yang boleh dipercayai dan rendah silau untuk keselamatan, maruah, dan penyebaran pantas. Kami mereka bentuk susun atur kem untuk jalan, lorong, laluan WASH, pintu gerbang, dan kawasan barisan menggunakan EN 13201 / IES RP-8 untuk jalan dan laluan dalaman, EN 12464-2 untuk kawasan kerja luar, IES G-1 untuk pengecaman CCTV, dan Pepijat TM-15 untuk mengawal silau dan percikan cahaya. CCT hangat hingga neutral dan CRI ≥80 menyokong keselesaan dan keterlihatan, manakala pilihan solar-terdahulu dengan pelemaman pintar memastikan pencahayaan tahan lasak tanpa perlu menggali parit di mana bekalan kuasa grid terhad.

Pertimbangan Utama

Safety First, Not Brightness First

Meet night safety and activity needs with the lowest effective light levels and capped glare.

Standards Mapping

Gunakan EN 13201 / IES RP-8 for internal roads/paths, EN 12464-2 for work zones (clinics, logistics), IES G-1 untuk pengecaman CCTV, dan Pepijat TM-15 for spill control.

Uniformity Over Peaks

Target practical U₀/Uᵢ ratios to remove dark corners rather than chasing high averages.

CCT/CRI Policy

Keistimewaan 3000–4000K dan CRI ≥80 for comfort, color fidelity, and face/plate recognition.

Vertical/Semicylindrical Illuminance

Provide recognition-grade vertical light at gates, WASH routes, and distribution queues.

Solar-First Resilience

Prioritize solar where grid is weak; size for risk-based autonomy (weather, season, latitude).

Controls & Curfew

Time-of-night dimming with sensor boost for late hours to save energy without reducing safety.

Glare/Spill Mitigation

Use low-BUG optics, back-light shields, and zero-tilt aiming to protect shelters and tents.

Durability & Protection

Tentukan IP66/IK09+, surge protection, anti-corrosion finishes, and anti-theft fasteners.

Maintainability & Training

Modular parts, clear spares list, and short training for local maintenance teams.

Prinsip Reka Bentuk

Light Where People Are

Prioritize paths, queues, and gathering points over empty setbacks.

Malah Sightlines

Pole rhythm and luminance gradients guide movement and reduce fear of dark gaps.

Jaga agar cahaya fokus pada tugasan.

Type II/III distributions and correct offsets keep light off façades and tent interiors.

Curfew Profiles

Dim to curfew levels with instant sensor-based restoration.

Camera-Friendly Lighting

Limit veiling luminance and provide vertical light for analytics to work.

Portable & Redeployable

Favor systems that can be relocated as camp layouts evolve.

ROI kitaran hayat

Controls + autonomy sizing cut OPEX and truck rolls.

Culturally Sensitive

Warmer tones near living zones; avoid intrusive glare at prayer/quiet areas.

Penyelesaian mengikut senario

Camp Entrances & Registration

Recognition-grade vertical light with capped glare for IDs and signage.

Food Distribution & Cash Queues

Uniform light across lines and exits to prevent crowding risks.

WASH Routes (Latrines/Showers)

Shielded path lighting with sensor boost for privacy and safety.

Shelter Aisles & Footpaths

Low-glare Type II optics for wayfinding without lighting up interiors.

Clinics & Health Posts

EN 12464-2 referenced task/area lighting around triage and ambulance bays.

Learning & Community Tents

Softer vertical light supporting supervision and comfort.

Perimeter & Patrol Routes

Cut-off distributions for detection without spill into neighboring residences.

Logistics Yards & Warehouses

Higher mounting and robust optics for loading and security.

Temporary Reception Sites

Portable, fast-deploy units with pre-set dimming profiles.

Market Stalls & Charging Points

Balanced CCT and glare control for trade areas and device charging stations.

Apa yang anda dapat

  • Camp lighting layout merujuk EN 13201 / IES RP-8 / EN 12464-2 / BUG with uniformity & glare checks.
  • Vertical illuminance review for gates, queues, WASH and camera corridors.
  • Pole/optics schedule(heights, offsets, foundations, EPA/wind notes)。
  • Controls & autonomy plan(curfew profiles, sensor logic, solar sizing & expected nights)。
  • BOM & dokumen bidaan(datasheets, IES files, warranties, install drawings)。
  • Compliance mapping to local/agency requirements.

Produk Lampu Jalan Solar Yang Disyorkan

BISON (INL-AIT7)

Padat, cekap, kelas >180 lm/W—taman komuniti dan kawasan perindustrian sedia.

FALCON (INL-AIT6)

Keluaran sederhana, optik serbaguna, pemasangan pantas—sesuai untuk jalan, laluan, dan kawasan letak kereta.

JAGUAR (INL-AIT5)

All-in-two keluaran tinggi dengan LED 5050, bateri LiFePO4 berkapasiti besar, optik canggih—dibina untuk lebuh raya dan jalan utama.

SIRIUS (INL-AIO9)

AIO keluaran tinggi dengan kepala boleh laras, optik Jenis II/III, LED 5050 dan LiFePO4—dibina untuk jalan dua hala dan lebuh raya.

All-in-One-Solar-Street-Light-GALAXYSeries

GALAKSI (INL-AIO6)

AIO modular untuk keluaran kecil hingga sederhana; LED 5050, LiFePO4 dan pilihan gerakan/IoT—penyelenggaraan mudah untuk jalan, laluan, tempat letak kereta.

Lampu Jalan Solar Jenis Pisah APOLLO

Bateri Litium APOLLO

Sistem jenis terpisah dengan penyimpanan LiFePO4, LED 5050, telemetri pintar/gerakan pilihan; sudut panel dan lampu yang fleksibel untuk memaksimumkan hasil dan liputan bagi jalan raya, laluan, dan tempat letak kereta.

Produk Lampu Jalan LED yang Disyorkan

Temui penyelesaian lampu jalan LED kami yang direka untuk senario pencahayaan taman dan rekreasi. Semua produk ini boleh disesuaikan mengikut keperluan spesifikasi projek anda.

Lampu jalan LED

INL-LED25 — Lampu Jalan LED

Pakej 100–200 W, optik jalan raya dan pemacu yang bersedia untuk kawalan bagi jalan utama dan jalan pengumpul.

Lampu jalan LED

INL-LED24 — Lampu Jalan LED

50–200 W dengan optik Tipe II/III/V yang tepat; servis tanpa alat dan pilihan SPD untuk perbandaran.

Lampu jalan LED

INL-LED23 — Lampu Jalan LED

Julat kuasa tinggi 50–240 W untuk jarak yang lebih luas; pelbagai dudukan lengan/slip-fitter.

Lampu jalan LED

INL-LED22 — Lampu Jalan LED

Platform serba boleh 60–200 W dengan pengagihan jalan raya dan pilihan kawalan.

Lampu jalan LED

INL-LED13 — Lampu Jalan LED

60–200 W dengan rumah die-cast tahan lama dan penarafan IP/IK untuk jalan bandar dan kawasan luas.

Soalan Lazim

Internal roads and shared paths follow EN 13201 / IES RP-8; outdoor work areas (clinics, logistics) reference EN 12464-2; CCTV recognition uses IES G-1 guidance; glare and spill are checked using Pepijat TM-15.

3000–4000K dengan CRI ≥80 balances comfort, recognition, and cultural acceptance around shelters, gates, and queues.

We specify low-BUG optics, back-light shields, correct pole offsets, and zero-tilt aiming to keep light on the path, not inside.

We set vertical or semicylindrical illuminance targets in camera corridors, manage veiling luminance, and choose camera-friendly CCT/CRI.

We size batteries for risk-based autonomy considering season, weather, and latitude—typically 2–5 nights depending on site risk.

A full photometric layout with uniformity/glare checks, pole & optics schedule, controls/curfew plan, BOM, dan compliance notes.

Pilih tenaga suria for trench-free, rapid deployment and resilience; choose AC LED for dense, grid-served zones—both support smart dimming.

Modular designs, spare parts lists, and short on-site training enable community-level maintenance and quick redeployment.

Project review: Agree priority routes and lighting needs with camp management and the relevant protection, WASH, health and logistics teams. Battery reserve, dimming and nighttime output must be verified for the project location and operating schedule; a typical backup-night figure is not a site guarantee. Household lanterns, indoor shelter wiring and mini-grid design are separate scopes.