Faro de mástil alto en el hipódromo

Inlux Solar supplied 8 sets of Stadium Mast Light for a private racecourse lighting project in Sharjah, UAE. The project configuration uses 20m Q235 hot-dip galvanized poles, 9 x 400W LED lighting, LiFePO4 battery chemistry, IP66/IK09 lighting equipment, and a 120 km/h wind-resistance requirement for the pole structure.

Site Application & Lighting Requirement

A racecourse is a large open venue where lighting buyers need to review pole locations, aiming angles, glare control, uniformity targets, and maintenance access before production. For similar stadium and sports lighting projects, the layout should be checked against the track area, viewing zones, equipment access, and any nearby buildings or spectator areas.

Why This Configuration Was Selected

The confirmed setup combines 20m Q235 hot-dip galvanized poles with 9 x 400W LED output and LiFePO4 battery chemistry. For buyers comparing Faro del estadio options, the key decision is whether pole height, fixture quantity, wind requirement, and installation method match the venue layout and target lighting level.

Procurement Value for Similar Buyers

Racecourse and sports-venue lighting projects require more than a product quotation. Buyers should confirm pole structure, fixture grouping, foundation conditions, installation equipment, cable routing, and lighting simulation files before approving production. Inlux Solar can support similar high mast lighting inquiries with configuration review, product selection, and project documentation for private venues, EPC teams, and facility owners.

What Similar Project Buyers Should Confirm

• Venue type, track size, lighting zones, and whether the project covers racecourse, training, parking, or mixed-use areas.
• Required pole height, pole material, wind-resistance target, foundation design, and lifting equipment for owner-side installation.
• LED fixture quantity, wattage, beam angle, aiming plan, glare control, and target illuminance or uniformity standard.
• Battery chemistry, expected operating hours, control method, and maintenance access.
• Shipment destination, container plan, document requirements, and whether lighting simulation or layout drawings are needed before production.

Related Lighting Solutions

For buyers planning similar outdoor venue projects, start with the Stadium Mast Light solution page, the Poste de iluminación para estadio product page, and the poste de luz category. These pages help narrow the pole, fixture, and application requirements before sending an RFQ.

Preguntas frecuentes

What configuration was used for the Sharjah racecourse lighting project?

The project uses 8 sets of Stadium Mast Light with 20m Q235 hot-dip galvanized poles, 9 x 400W LED lighting, LiFePO4 battery chemistry, IP66/IK09 lighting equipment, and a 120 km/h wind-resistance requirement.

Why are stadium mast lights suitable for a racecourse?

Racecourses need elevated lighting positions to cover wide outdoor areas. Stadium mast lights help buyers plan fixture grouping, pole locations, aiming angles, and service access for large venue lighting.

Is a 20m pole height suitable for every racecourse?

No. The 20m pole height is specific to this Sharjah project. Buyers should confirm track width, pole spacing, fixture aiming, wind requirement, and target lighting level before ordering.

What should private venue or EPC buyers confirm before requesting a quote?

Confirm quantity, venue layout, pole height, LED wattage, wind-resistance requirement, IP/IK level, battery details, installation responsibility, shipping destination, and required design documents.

Can this case be used as proof of measured racecourse illumination?

No measured illuminance report is included on this case page. The case can support configuration and project-reference review, but final lighting performance should be confirmed with lighting simulation or site measurement files.