Iluminación temporal

Inicio / Iluminación temporal

Rapid-deploy, low-glare lighting for outages, worksites, and events. We deliver temporary layouts using EN 12464-2 para zonas de trabajo al aire libre, EN 13201 / IES RP-8 for access roads and pop-up parking, IES G-1 for CCTV corridors, and BUG TM-15 to control spill and skyglow. Neutral-white CCT (~4000 K) with Índice de reproducción cromática (IRC) ≥80 supports safe tasks and recognition. Solar towers and mast lights enable trench-free setups, while AC or hybrid options keep operations continuous.

Consideraciones clave

Rapid Deployment First

Specify systems that lift, aim, and commission quickly with minimal civils.

Standards Mapping

Solicitar EN 12464-2 (work areas), EN 13201 / IES RP-8 (roads & pop-up parking), IES G-1 (CCTV), and BUG TM-15 (glare/spill).

Uniformity Over Peaks

Target practical U₀/Uᵢ to remove dark pockets rather than chasing high averages.

Low-Tilt Aiming

Limit ULOR and high-angle intensity; use visors/shields where neighbors or drivers are nearby.

Vertical/Semicylindrical Illuminance

Provide recognition-grade vertical light at gates, queues, and camera corridors.

CCT & CRI Policy

Blanco neutro ~4000 K y Índice de reproducción cromática (IRC) ≥80 for task clarity and comfortable queues.

Power Strategy

Solar for trench-free resilience; AC where supply exists; hybrid to bridge poor seasons.

Medidas de control y toques de queda

Scene-based presets with motion boost after hours to save energy without reducing safety.

Durability & Protection

IP66/IK08+, surge, anti-corrosion finishes; secure cabling for frequent moves.

Serviceability & Reuse

Modular parts and tool-less access to speed redeployment and reduce truck rolls.

Principios de diseño

Líneas de visión uniformes

Pole rhythm and beam selection eliminate black holes between towers.

Mantén la luz enfocada en la tarea

Cut-off distributions and visor kits keep light off façades, tents, and drivers.

Scene Logic

Presets for work, queue, egress, and standby; instant override for incidents.

Cable-Safe Layouts

Clear routes for temporary cabling, avoiding glare onto operators and cameras.

Aim for People

Balance horizontal and vertical light so faces, plates, and markings read clearly.

Portable & Stackable

Choose bases, masts, and luminaires that transport compactly and lock securely.

Wind & Vibration Readiness

Size masts/brackets for site wind/EPA; anti-vibration hardware protects aiming.

Lifecycle ROI

Controls + reuse planning cut OPEX across seasons and sites.

Soluciones por escenario

Emergency Outage & Restoration

Solar/AC towers restore safe work light fast, with curfew dimming after crews leave.

Construction & Maintenance Zones

Mini/High masts with visor control keep glare off traffic and homes.

Events & Festivals

Scene presets cover ingress/egress, queues, and vendor rows without lighting the sky.

Pop-Up Parking & Detours

EN 13201/RP-8 class-based layouts with safe uniformity and low TI.

Disaster Relief & WASH Routes

Shielded path light and vertical illuminance for recognition and safety.

Gatehouses & Checkpoints

Vertical/semicylindrical targets support ID and CCTV analytics.

Staging Yards & Logistics

Long-throw floods for stacks and loading, with low-tilt aiming.

Temporary Market Streets

Warm-neutral CCT and glare caps for comfortable footfall and signage.

Estacionamientos y paradas de autobús

Diseños basados en la norma EN 13201/RP-8 con vías peatonales despejadas y bajo deslumbramiento.

Marcadores y fachadas

Añade un toque de estilo con los kits de visera; evita el resplandor del cielo y la distracción del conductor.

Qué incluye

  • Temporary lighting layout package with average/vertical illuminance, uniformity, and BUG/TM-15 checks mapped to EN 12464-2 / EN 13201 / IES RP-8 / IES G-1.
  • Mast/aiming schedule(heights, brackets, EPA/wind, foundations/ballast, lowering/transport notes)。
  • Controls & curfew plan(scenes, sensors, overrides;solar autonomy & hybrid strategy)。
  • CCTV corridor review(vertical light & veiling luminance management)。
  • Lista de materiales y documentación de presentación(datasheets, IES files, warranties, install drawings)。
  • Notas sobre el cumplimiento mapping international standards to local requirements.

Recommended Products

Luz solar para torre

Luz solar para torre

Iluminación de torre alimentada con energía solar para emplazamientos remotos o temporales, con mástil telescópico y conjuntos modulares de proyectores. Diseñada para un rápido despliegue y mantenimiento.

Temporary Lighting FAQs

EN 12464-2 para zonas de trabajo al aire libre, EN 13201 / IES RP-8 for roads and pop-up parking, IES G-1 for CCTV corridors, and BUG TM-15 to limit glare and spill.

Yes, gates, queues, and camera corridors receive vertical/semicylindrical targets for recognition and analytics.

Neutral-white ~4000 K con Índice de reproducción cromática (IRC) ≥80 balances task clarity, comfort, and camera color fidelity (typical for temporary work areas).

We use cut-off optics, visor kits, and low-tilt aiming, verifying BUG limits and veiling luminance in our layouts.

Uso solar towers/masts where trenching is impractical; use AC where reliable supply exists; consider hybrid to bridge poor seasons and ensure continuity.

A photometric layout pack, mast/aiming schedule, controls/curfew plan, CCTV corridor review, Lista de materiales y documentación de presentación, and compliance notes.

Yes, portable towers/masts and modular floods are selected for compact transport, fast re-aiming, and repeatable setup.

Project scope: Confirm the outdoor work zones, operating hours, power source, relocation plan and responsibility for installation before selecting temporary lighting. This page does not establish compliance for statutory emergency-egress or life-safety systems, hazardous-location equipment, or specialist stage and broadcast lighting. Continuity and site safety depend on the approved configuration and project plan.