Projetos

GALAXY AIO6 Solar Street Light Project in Douala, Cameroon

This project records the supply of 88 GALAXY-INL-AIO6 all-in-one solar street lights for a private-sector outdoor lighting project in Douala, Cameroon. According to the collected project data, the confirmed configuration included 40W LED power, 6m Q235 poles, a 40Ah / 12.8V battery configuration, IP66 protection, and shipment by one 40HQ container with an estimated sea shipping cycle of about two months.

The original project record should not be described as a public lighting or UNDP project unless separate evidence is available. For this page, the safest and most accurate positioning is a private solar street lighting project in Douala using the GALAXY AIO6 all-in-one solar street light.

Site Application & Lighting Requirement

The collection sheet does not specify the final application category, so this case should be presented as a private outdoor lighting project rather than a public municipal lighting project. For similar buyers in Cameroon or other African markets, a 6m pole and 40W integrated solar street light configuration is typically considered for compact roads, private site access areas, residential compounds, internal facility roads, or small-scale outdoor lighting zones where grid extension is costly or inconvenient.

Before using the same configuration, buyers should confirm the road width, pole spacing, mounting height, expected nightly operating hours, seasonal solar conditions, and target lighting level. If the project is intended for roads or village streets, the buyer should compare the requirement with Inlux Solar’s road and street lighting guidance. If the project is for a private compound or residential area, the residential community lighting application page is a more relevant reference.

Why This Configuration Was Selected

The collection sheet does not record the customer’s exact selection reasons. The points below explain the practical procurement logic behind this type of configuration without adding unconfirmed claims.

  • Integrated system for simpler deployment: The GALAXY-INL-AIO6 is an all-in-one solar street light, which helps reduce separate component handling on site compared with split-type systems.
  • 40W LED output for moderate outdoor lighting demand: The recorded 40W LED configuration is suitable for projects that require practical area coverage without moving into high-power roadway or high-mast lighting categories.
  • 6m Q235 pole structure: A 6m pole height is commonly used for smaller roads, private access routes, and compact outdoor areas. The collection sheet confirms Q235 pole material, while surface treatment and wind rating should be confirmed before final procurement.
  • Battery sizing recorded as 40Ah / 12.8V: This battery configuration should be checked against nightly working hours, dimming schedule, autonomy days, and local solar resource before mass ordering.
  • IP66 protection: The confirmed IP66 rating supports outdoor use, but buyers should still confirm installation details such as pole foundation, cable protection, and local maintenance access.

Procurement Value for Similar Buyers

For buyers comparing luzes de rua solares tudo-em-um for private or small public projects, this Cameroon case is useful because it shows a mid-scale order size rather than a single sample installation. With 88 sets supplied in one shipment, the project gives buyers a more realistic reference for packaging, shipping coordination, and field deployment planning.

  • Order scale: 88 sets is large enough to require careful packing, spare parts planning, and installation sequencing, but still compact enough for private-sector procurement.
  • Shipping reference: The recorded shipping cycle was about two months with one 40HQ container, which is useful for buyers planning project timelines around sea freight.
  • Configuration discipline: The page should clearly separate confirmed data from missing data, especially solar panel wattage, controller type, dimming program, color temperature, and IK rating.
  • Product family fit: GALAXY is positioned as a cost-optimized all-in-one system. Buyers requiring higher autonomy, larger roads, or stricter municipal specifications should also compare the broader luz de rua solar range before final selection.

What Similar Project Buyers Should Confirm

A similar buyer should not copy the configuration only from the project title. The final specification should be checked against the actual site layout, lighting target, installation environment, and operating schedule.

  • Confirm whether the project is for private roads, public roads, residential compounds, parking areas, perimeter zones, or facility access routes.
  • Confirm pole spacing, road width, mounting height, and expected illumination level before approving the 6m / 40W configuration.
  • Confirm solar panel wattage, battery chemistry, battery cycle life, controller type, and dimming schedule because these details are not recorded in the collection sheet.
  • Confirm the pole finish, foundation design, anchor bolts, and local wind requirement before manufacturing the pole package.
  • Confirm whether extra spare batteries, controllers, LED modules, or pole accessories should be shipped with the main order.
  • Confirm Incoterms, inland transport, customs clearance, and installation responsibility because the collection sheet only confirms sea shipping cycle and container quantity.

Related Solar Lighting Solutions

PERGUNTAS FREQUENTES

What product was used in this Cameroon project?

The recorded product model is GALAXY-INL-AIO6, an all-in-one solar street light. The collection sheet confirms 88 sets with 40W LED power, 6m Q235 poles, a 40Ah / 12.8V battery configuration, and IP66 protection.

Is this project a public lighting project?

The collection sheet identifies the client type as private and does not specify the final application category. For that reason, the page should not describe it as a public or UNDP project unless separate evidence is provided.

What should buyers confirm before using a similar configuration?

Buyers should confirm road or site width, pole spacing, target lighting level, nightly operating hours, local sun conditions, battery autonomy, dimming schedule, pole foundation design, and shipping constraints before finalizing the same configuration.

Does the page include solar panel, controller, color temperature, or IK details?

These details are not included in the collection sheet. They should be left blank or marked as not specified in the project fields until the technical file is confirmed.

Should the contract amount be published?

The collection sheet includes a contract amount, but it should not be displayed on the public page by default. Keep it internal unless there is explicit approval to publish commercial data.

Localização do projeto


País: Cameroon

Cidade: Douala

Quantidade: 88 Sets

Aplicativo: Outdoor lighting project

Ano de conclusão: 2024

Configurações principais


Altura do poste:6m

Potência do LED:40W

Bateria:LiFePO₄ 40AH / 12.8V

Galeria de projetos


Sucesso comprovado em grandes projetos

Concluímos vários projetos globais, fornecendo iluminação solar de alta qualidade dentro do prazo e do orçamento. Nosso serviço e suporte contínuos garantem o desempenho ideal, desde a instalação até a manutenção e a assistência técnica.

Entre em contato conosco hoje mesmo

Tipo de projeto
Serviço necessário
Arrastar e soltar arquivos,, Escolha os arquivos para upload Você pode enviar até 10 arquivos.
*Files are kept confidential. We sign NDAs on request. Allowed File Extensions: .pdf, .doc, .docx, .xls, .xlsx, .csv, .ppt, .pptx, .jpg, .jpeg, .png, .zip, .rar, .dwg, .dxf, .ies, .ldt. Max File Upload: 50 MB

About Me

Imagem padrão
Inlux Solar Engineering Team View Profile
Inlux Solar Engineering Team is the technical content team behind Inlux Solar’s solar street lighting guides, project insights, and product engineering resources. The team works with Inlux Solar’s R&D, technical, production, and quality-control departments to explain solar street light design, component selection, photometric planning, project specification, installation, and long-term reliability for municipal, commercial, EPC, and infrastructure buyers. Our content is based on Inlux Solar’s factory experience, field project records, product test data, and engineering support for global solar lighting projects, including UNHCR, UNDP, municipal, refugee-camp, highway, industrial, and public-area lighting deployments. Inlux Solar operates a 28,000 m² manufacturing facility with 10 production lines, 30+ engineers, 60+ patents, and 300+ product certificates. Articles by the Inlux Engineering Team are written or reviewed with input from technical, R&D, production, and QC staff to keep recommendations practical, specification-ready, and aligned with real project conditions.