Commercial Outdoor Security Lighting for Perimeters
Design risk-appropriate lighting along fences, yards and access points to deter, detect and recognize. We align with IES G-1 (security lighting principles), IES RP-8 (adjacent roadways) and EN 12464-2 (outdoor workplaces), and we size vertical/semicylindrical illuminance for faces, gates and camera corridors. Optics, mounting and spacing are optimized from photometry to deliver uniformity with low glare, while BUG/TM-15 controls spill to neighbors and skylines. Submit your site plan for a standards-based layout, calculation report and bill of materials—available in LED alimentado pela rede ou solar soluções.
Key Considerations for Perimeter & Security Lighting
Standards alignment
IES G-1 for security lighting, EN 12464-2 for outdoor work areas, and IES RP-8 where roadways interface.
Vertical light for recognition
Alvo vertical/semicylindrical illuminance at gates, turnstiles, doors and camera corridors to reveal faces and apparel.
Glare & spill control
Manage BUG/TM-15 and veiling luminance; shield at perimeters, upper stories and neighboring properties.
Power & resilience
Scheduling and occupancy sensing; for solar, battery autonomy sized for worst-case nights and restart after outages.
Design Principles for Perimeter & Security Lighting
Risk-based classes
Lighting targets scale with risk and task—deterrence, detection and recognition—rather than a single fixed lux value.
Optics & geometry
Type II/III for perimeter runs; Type IV/V or forward-throw for yards. Pole height and spacing are calculation outcomes.
CCTV integration
Fornecer consistent vertical light, limit blooming/flare into lenses, and coordinate CCT/CRI with camera WDR/IR.
Color & comfort
3000–4000 K typical; CRI ≥80 near gates and ID checks for color-critical recognition.
Controls & operations
Staggered dimming for off-hours, motion-based step-ups, health monitoring and fault alerts.
Soluções por cenário
For off-grid sites, solar security lighting can be evaluated alongside LED perimeter lighting. The project brief should define perimeter geometry, pole locations, operating hours, camera or CCTV coordination, battery reserve, and maintenance access. Final photometrics, autonomy, and camera performance require site-specific review. If cameras are in scope, review the solar CCTV power and pole interfaces. Send the perimeter layout and operating brief, identifying who supplies the cameras, communications, lighting and commissioning work so the quotation has a clear supply boundary.
Fence Lines & Clear Zones
Continuous uniformity with low glare; forward-throw optics to avoid lighting the outside beyond the fence.
Gates, Guardhouses & Turnstiles
Elevated vertical/SC components for faces and IDs; back-light shielding to protect operators’ vision.
Yards, Loading Docks & Container Areas
Wide/forward distributions with mast poles; maintain shadow control between vehicles and stacks.
Camera Corridors & PTZ Overlaps
Even vertical illumination across camera FOV; avoid highlights behind subjects that cause silhouettes.
Parking & Perimeter Interfaces
Tie security foot-candles to parking code minima; cap spill at property lines and residential edges.
O que você recebe
- EN 13201 / IES RP-8 compliant layout (luminance or illuminance/vertical/SC as applicable)
- Arquivos fotométricos (IES/LDT) + relatórios de cálculo
- Pole/foundation drawings + single-line diagram
- Bill of materials with options (LED vs Solar, pole heights, optics)
- O&M and warranty checklist
- Compliance crosswalk mapping local guidelines to EN 13201 / IES RP-8.
- Lead time, logistics and installation method statement (optional).
- Security-focused photometric package (horizontal + vertical/SC where required)
- CCTV coordination notes (camera placement, lens FOV, tilt and expected vertical E)
- Commissioning checklist with target set-points, dimming schedules and acceptance criteria
Produtos recomendados para iluminação pública solar
JAGUAR (INL-AIT5)
All-in-two de alto rendimento com LEDs 5050, LiFePO4 grande, ótica avançada - construído para rodovias e estradas principais.
FALCON (INL-AIT6)
Saída média, ótica versátil, instalação rápida - ideal para ruas, caminhos e lotes.
BISON (INL-AIT7)
Compacto, eficiente, classe >180 lm/W - pronto para uso em pátios comunitários e industriais.
SIRIUS (INL-AIO9)
AIO de alto rendimento com cabeçote ajustável, óptica Tipo II/III, LEDs 5050 e LiFePO4 - construído para estradas e rodovias de mão dupla.
GALÁXIA (INL-AIO6)
AIO modular para saídas de pequeno a médio porte; LEDs 5050, LiFePO4 e movimento opcional/IoT - fácil manutenção para ruas, caminhos e estacionamentos.
Produtos recomendados para iluminação pública de LED
Review LED roadway luminaires for perimeter routes, gates and yard interfaces. Confirm the selected optic, mounting arrangement and control requirements through a site-specific lighting review.
INL-LED25 - Luz de rua de LED
Pacotes de 100-200 W, óptica de estrada e drivers prontos para controles para estradas principais e coletoras.
INL-LED24 - Luz de rua de LED
50-200 W com óptica precisa Tipo II/III/V; serviço sem ferramentas e opções de SPD para municípios.
INL-LED23 - Luz de rua de LED
Faixa de alta potência de 50-240 W para espaçamentos mais amplos; vários suportes de braço/slip-fitter.
INL-LED22 - Luz de rua de LED
Plataforma versátil de 60-200 W com opções de controles e distribuições de pista.
INL-LED13 - Luz de rua de LED
60-200 W com invólucro fundido durável e classificações IP/IK para ruas e lotes urbanos.