In May 2026, Inlux Solar completed a solar flood light project for a private GRC precast yard in Malaysia. The site is located at PLO 3, Jalan SR/2 and required high-mounted outdoor lighting for yard operations, material movement, vehicle circulation, and industrial work after daylight hours.
This was not a standard street lighting project. A GRC precast yard is an open industrial working area where lighting must support wider ground coverage, reliable night visibility, and long-term outdoor exposure. For this reason, the project was configured as a solar flood light system with 13m hot-dip galvanized poles, 5000K color temperature, IP66 protection, and a 40Ah / 25.6V × 3 battery configuration.
The recorded project cycle was approximately four months, including about one and a half months of sea shipping. For overseas B2B buyers, this type of case is useful because it shows not only the product configuration, but also how pole height, battery sizing, shipment planning, and site application requirements are considered together before delivery.
Site Application & Lighting Requirement
The project site was a private GRC precast yard in Malaysia. Unlike a road, pathway, or parking lot, this type of industrial yard normally requires flood lighting for a broader working area rather than linear lighting along a fixed route. The lighting system needs to support visibility across open ground, around production or storage zones, and near vehicle movement areas.
For similar open-area projects, buyers can also review Inlux Solar’s Iluminação de zonas industriais e fábricas e Perimeter & Security Lighting solutions. These application pages are more relevant for industrial yards, factories, storage areas, and outdoor work sites than standard decorative lighting pages.
For this project, the 13m pole height was an important part of the lighting approach. Higher mounting helps the flood light cover a wider area and reduces the need for many low-mounted lighting points. In an industrial yard, this can make the lighting layout cleaner and more practical for daily operations.
The use of hot-dip galvanized poles also fits the outdoor nature of the site. For buyers planning similar projects, pole finish is not only an appearance issue. It affects long-term exposure performance, especially when poles are installed in open industrial areas where rain, humidity, dust, and site activity are common.
Why This Configuration Was Selected
The configuration was selected around three practical factors recorded in the project information: working time, customer requirement, and local sunshine factor. These are the key variables that normally decide whether a solar flood light project can work reliably in a real industrial environment.
- Working time requirement: The lighting system had to support the customer’s required outdoor working hours. In solar lighting projects, this affects battery configuration, lighting control, and overall system sizing.
- Customer requirement: The site needed high-mounted flood lighting for an open GRC precast yard, not decorative lighting or low-height pathway lighting. The selected 13m pole height better matched this open-area requirement.
- Sunshine factor: Solar lighting performance depends on local solar conditions. The system configuration had to consider solar charging, battery storage, and expected night operation together.
- Outdoor protection: IP66 protection was suitable for an outdoor industrial environment where the fixture may face rain, dust, and continuous exposure.
- Installation readiness: The project required coordination of solar flood lights, tall poles, battery configuration, shipment, and site installation preparation before delivery.
Procurement Value for Similar Buyers
For B2B buyers, this Malaysia project shows why solar flood lighting should be purchased as a complete project system rather than as a single lamp. In an industrial yard, the buyer must confirm the pole height, lighting area, battery configuration, protection rating, shipping schedule, and installation conditions before placing an order.
A low-priced lamp alone does not solve the project. If the pole height is too low, the lighting coverage may be insufficient. If the battery configuration is not matched to the working time, the system may not support the required operating schedule. If the pole finish and outdoor protection are not suitable, long-term site performance may be affected.
This is where a project-based solar lighting supplier becomes valuable. Inlux Solar can support similar buyers with product selection, pole matching, configuration review, and export delivery planning for industrial yards, precast facilities, logistics yards, storage areas, parking areas, and other open outdoor work sites.
- Suitable for GRC precast yards and other open industrial areas
- 13m pole height for wider flood lighting coverage
- Solar-powered operation for sites seeking off-grid or grid-saving lighting
- IP66 outdoor protection for industrial environments
- Hot-dip galvanized pole structure for long-term outdoor use
- Recorded project cycle and sea shipping time for procurement planning
What Similar Project Buyers Should Confirm
Before purchasing solar flood lights for an industrial yard, buyers should not only ask for lamp wattage. A reliable quotation should confirm the lighting area, pole height, expected working time, local sunshine condition, battery configuration, installation method, and shipping plan.
For example, a GRC precast yard may need a different lighting approach from a road, park, or residential area. The lighting must support work visibility and site movement rather than only meet decorative or low-traffic requirements. This is why project information must be reviewed before selecting the final configuration.
If you are planning a similar project, Inlux Solar can help compare solar flood light options with other outdoor lighting systems, including iluminação pública solar comercial, flood light poles, and industrial lighting solutions.
Related Solar Lighting Solutions
- Holofote solar - lanterna for open-area solar flood lighting projects
- Poste de holofote for high-mounted outdoor lighting structures
- Iluminação de zonas industriais e fábricas for factories, yards, and outdoor work areas
- Perimeter & Security Lighting for industrial site boundaries and security-focused lighting
- Luzes solares para estacionamentos for open commercial parking and yard lighting applications
- Commercial Solar Street Lights for broader municipal and industrial solar lighting projects
PERGUNTAS FREQUENTES
How many solar flood lights were installed in this Malaysia project?
The project used 13 sets of solar flood light systems for a private GRC precast yard in Malaysia.
Why was a 13m pole used for this project?
The site was an open industrial yard, so a higher mounting height helped support wider lighting coverage than low-mounted fixtures. The 13m pole height was suitable for this type of yard lighting application.
What battery configuration was recorded for this project?
The recorded battery configuration was 40Ah / 25.6V × 3. Battery chemistry and cycle life were not specified in the project collection sheet, so they should not be added unless confirmed by a separate technical file.
What LED parameter was confirmed?
The confirmed LED parameter from the project collection sheet is 5000K color temperature. LED wattage and luminous efficacy were not clearly specified in the source sheet.
How long did the project take?
The recorded project cycle was approximately four months, including about one and a half months of sea shipping.
What types of sites are suitable for similar solar flood light systems?
Similar applications include GRC precast yards, industrial yards, storage areas, outdoor factory zones, logistics yards, parking areas, and other open sites that need solar-powered flood lighting.
Galeria de projetos
About Me
