Resposta rápida: Inlux Solar supplies project-grade street lights for sale to municipalities, EPC contractors, distributors and developers. This is a B2B project and wholesale page, not a single-fixture retail cart. Choose the product family from the power source, road or area geometry, lighting criteria, pole and foundation scope, environment, controls and maintenance plan; then request a configuration-specific quotation.
Street lights that look similar in a product photo can require very different optics, poles, batteries, controls and civil work. A useful offer identifies the exact model and order code, photometric file, operating profile, structural basis, delivery term, warranty and exclusions. A wattage label alone is not enough to compare two suppliers.
Which Street Lights for Sale Fit Your Project?
| Product family | Best starting point | What the RFQ must confirm |
|---|---|---|
| All-in-One solar street lights | Compact off-grid layout with integrated architecture | Exact model, IES/LDT file, PV/battery/controller configuration, nightly schedule, pole and wind basis |
| Lâmpadas solares All-in-Two para iluminação pública | Off-grid projects that want separation between the luminaire and energy module | Component access, cable and bracket scope, PV and usable battery energy, installation responsibilities |
| Split Type solar street lights | Projects that prioritize component flexibility and service access | Component locations, cable runs, enclosure protection, pole arrangement, maintenance access |
| Grid LED street lights | Existing AC networks, roadway retrofits and grid-connected new builds | Voltage, driver, surge protection, optics, control interface, bracket and retrofit constraints |
| Decorative solar street lights | Parks, boulevards, civic spaces and heritage-sensitive streetscapes | Architecture, finish, model-specific photometrics, solar balance, pole/foundation scope |
| Solar high-mast lighting | Large areas where a high-mast arrangement fits the photometric and structural brief | Mast geometry, lowering system, wind basis, foundation responsibility, aiming, controls and maintenance plan |
There is no universal “best” family. Start from the application and the evidence that must pass review. The product architecture is only one part of the delivered system.
Solar Street Lights for Sale
Solar street lights for sale should be quoted as complete off-grid systems. The installation coordinates, shading, worst-month solar resource, nightly operating profile, dimming schedule, usable battery energy, temperature limits and autonomy policy all affect the configuration. Ask for the selected model’s photometric file and an energy-balance summary; do not compare systems by advertised wattage or nominal battery Ah alone.
All-in-One
All-in-One architecture packages the main system elements into a compact product arrangement. It can simplify handling and visual coordination, but the exact service method, battery access, controller program and pole interface still depend on the model. The GALAXY product page is one product reference; it does not define every All-in-One configuration.
All-in-Two
All-in-Two architecture separates the luminaire from the solar-energy module while keeping a coordinated system. This can give the project team more flexibility for panel exposure and component access. The quotation should show component positions, cables, brackets, usable battery energy and installation scope. The JAGUAR product page is a model reference, not a blanket specification for the family.
Tipo de divisão
Split systems allow more independent placement of the luminaire, PV module and battery enclosure. That flexibility is useful only when the drawing also defines cable lengths, enclosure location, maintenance access, protection ratings and structural responsibilities. Use the APOLLO product page to inspect one current product path, then request the exact project order code.
Decorative Solar
Decorative solar lighting adds an architectural brief to the lighting and energy requirements. Finish, pole profile and visual proportions matter, but they do not replace the photometric, solar, structural and maintenance review. The HERA product page shows one decorative direction; final options remain model- and project-specific.
LED Street Light Wholesale for Grid Projects
An LED street light wholesale inquiry should specify whether it is a new grid-connected installation, a luminaire replacement or a retrofit onto existing poles and brackets. Provide the supply voltage, road geometry, existing mounting details, desired control interface, surge environment and applicable lighting criteria. The offer should return the exact luminaire, driver, optical file, mounting adapter, controls and protection evidence.
Wholesale LED street lights are not interchangeable because they share a nominal wattage. Optical distribution, driver and surge configuration, thermal design, housing, bracket interface, dimming protocol and order code can all change. For the commercial product range, use the LED street-light category as the money-page owner; this sale page is the procurement and quotation bridge.
How to Compare Street Lights for Sale
The fastest way to expose a weak quote is to ask every supplier for the same evidence. Use this review order:
- Application and geometry: road or area dimensions, intersections, pedestrian zones, setbacks, surfaces and pole positions.
- Requisitos de iluminação: applicable class or maintained target, uniformity, glare, spill-light and vertical-lighting needs.
- Exact product identity: family, model, order code, options and model-specific IES/LDT file.
- Power architecture: grid voltage and controls, or solar resource, PV, usable battery energy, controller schedule and autonomy policy.
- Pole and foundation: material, geometry, bracket, wind/design basis, corrosion system, fasteners and responsibility split. Use the current street-light pole page for the product route.
- Controls and integration: photocell, dimming, motion, remote monitoring, gateway/network, platform, SIM/license and commissioning. Define these through the smart street-lighting system page.
- Commercial scope: quantity, Incoterm, packing, lead time, freight, taxes/duties exclusions, payment terms and validity date.
- Handover: drawings, manuals, test evidence, settings, acceptance checks, training, spares, warranty and service responsibilities.
This is how a distributor or EPC buyer turns a broad search for street lights for sale into a quotation that engineering, procurement and finance can compare together.
What a Wholesale Quote Should Include
| Quote line | Required detail | Common omission to catch |
|---|---|---|
| Luminaire or solar system | Exact model/order code, optics, controls and photometric file | A generic datasheet that does not match the offered order code |
| Pole and bracket | Geometry, material, coating, wind/design basis and interface drawing | Foundation, bracket or fastener scope left undefined |
| Solar energy system | PV, battery chemistry, nominal and usable energy, BMS limits and controller schedule | Nominal Ah shown without voltage, usable energy or nightly load |
| Grid electrical scope | Voltage, driver, surge protection, dimming/control protocol and wiring boundary | Existing cabinet, circuit or grounding responsibility omitted |
| Logistics | Incoterm, packing list, package dimensions/weights, destination and exclusions | FOB, CIF and delivered costs compared as if they were the same |
| Installation and commissioning | Survey, civil works, lifting, assembly, aiming/settings, tests and training | Product supply presented as a complete installed project |
| Warranty and service | Covered components, exclusions, claim process, spares and ongoing platform costs | A warranty duration shown without covered parts or remedy |
If a supplier cannot identify these lines, the quote is not ready for a purchase decision.
Minimum Technical Submittal: 8 Files
Before approving a wholesale order, ask for one coordinated submittal set:
- commercial quotation and itemized BOM;
- exact model/order-code datasheet;
- model-specific IES or LDT photometric file;
- project layout or DIALux-equivalent calculation with assumptions;
- pole, bracket and foundation-interface drawings;
- solar energy-balance summary, when the system is off-grid;
- applicable test/certificate matrix tied to the quoted products; and
- warranty, commissioning, spare-parts and acceptance documents.
Eight filenames do not prove compliance by themselves. Check that the model numbers, quantities and options agree across the quotation, BOM, calculation, drawings and warranty.
Inlux Solar: Company-Level Evidence, Not Blanket Product Claims
Inlux Solar was founded in 2019. The locked company baseline records a 28,000 m² factory, stated production capacity of 20,000 sets per month, 30+ engineers, 300,000+ cumulative units delivered, 1,000+ projects across 60+ countries and a five-year standard warranty. These are company-level facts. They do not mean every product has the same output, certificate, protection rating, wind limit, battery life or installation scope.
For the model you are buying, request the exact datasheet, photometric file, energy-balance assumptions where solar is involved, drawings, applicable test evidence, BOM and warranty terms. The manufacturer sourcing checklist helps procurement teams compare those documents without relying on factory slogans.
Price, Freight and Installation Boundaries
This page does not publish one universal price because product configuration, quantity, currency, raw materials, pole scope, packing, freight, destination and Incoterm change. Use the solar street light price guide to build a like-for-like product quotation. Use the separate street-light project cost guide when the decision includes grid connection, trenching, foundations, energy, local installation and lifecycle scope.
“Factory direct” should never be read as “everything included.” State whether you need supply only, delivered equipment, installation supervision or a broader project package. Foundation design, civil works, local permits, crane/lifting, taxes, commissioning and network subscriptions must be assigned in writing.
Send an RFQ That Can Be Priced Correctly
For street lights for sale, send the following in the first inquiry:
- project country, city or coordinates;
- application and road/area geometry;
- lighting standard/class or maintained target;
- pole positions, mounting height range and foundation responsibility;
- grid voltage or solar operating profile and autonomy policy;
- temperature, wind/design basis and corrosion exposure;
- controls, monitoring or smart-city integration;
- quantity, destination and preferred Incoterm;
- required submittals, warranty, spares, training and acceptance process;
- drawings, photos and tender documents that the engineering team may use.
Send these inputs to Inlux Solar for a configuration-specific review and wholesale project quotation.
Two Useful External Checks
The U.S. Department of Energy’s exterior-lighting purchasing guidance gives buyers a useful framework for efficacy, controls, product performance and life-cycle cost. The DarkSky outdoor-lighting principles are a practical check on whether a proposed system is useful, targeted, no brighter than necessary, controlled and appropriately warm. Neither source replaces local standards, project calculations or model-specific product evidence.
Street Lights for Sale FAQ
Does Inlux sell both solar and grid LED street lights?
Yes. Inlux has solar product families, grid-connected LED street lights, decorative systems, solar high-mast options, poles and smart-lighting solutions. The final offer depends on the application and exact project configuration.
Is this a retail page for one or two household fixtures?
No. This page is for B2B project and wholesale procurement. Sample availability and minimum quantities vary by model and current quotation; state both the test quantity and full project quantity in the RFQ.
What is needed to quote solar street lights for sale?
Provide the location, geometry, lighting criteria, operating schedule, autonomy policy, pole and foundation scope, environment, controls, quantity, destination and Incoterm. Inlux then selects a model and returns the project-specific configuration and commercial scope.
Does the unit price include the pole, foundation, freight and installation?
Only if those items are explicitly listed. Require a line-by-line BOM and responsibility matrix. A luminaire price, FOB equipment quote and installed project cost are different scopes.
Can Inlux customize optics, controls, poles and finishes?
Project-specific options can be reviewed, but availability depends on the selected product and order code. Put the required optical distribution, controls, pole geometry, finish and evidence in the RFQ so the quotation can confirm what is available.
What warranty applies?
Inlux Solar’s standard warranty is five years. The quotation and warranty document should identify covered components, exclusions, claim process and remedy for the exact products supplied.
Buy the Scope, Not the Headline
The best street lights for sale are the ones that match the geometry, lighting requirement, environment, power architecture and maintenance plan—and arrive with evidence that procurement can verify. Choose the product family, define the scope and compare like with like. Then the wholesale price becomes meaningful.
Request a street-light project quotation with the site inputs and quantity.
