Integrated Solar Street Light (All-in-One Systems)
Inlux Solar integrated solar street lights are all-in-one systems that combine the solar panel, LiFePO4 battery, LED module, controller and sensor into one compact fixture. They are designed for municipal roads, rural streets, parking lots, campuses and commercial projects where simplified installation and reduced civil work matter. Compare the right series and request RFQ-ready engineering support from Inlux Solar.
- مقارنة SIRIUS وGALAXY وGALAXY وA ALIEN وPOLARIS حسب نوع المشروع
- طلب ملفات IES/LDT وأوراق البيانات ودعم التخطيط
- احصل على توصية سريعة بناءً على عرض الطريق وارتفاع العمود والهدف من اللوكس
Choose the Right Integrated Solar Street Light (All-in-One) Series
تتطلب المشاريع المختلفة تكوينات مختلفة للإضاءة الشمسية المتكاملة. استخدم الدليل أدناه لمطابقة السلسلة المناسبة لنوع الطريق وارتفاع التركيب وبيئة المشروع.
سلسلة SIRIUS

الأفضل لـ الطرق السريعة والطرق الشريانية والمشاريع البلدية ذات الطلب العالي
ليست مثالية لـ طرق مجتمعية منخفضة الارتفاع لا تتطلب تمركزاً أعلى في مواقعها
حالة الاستخدام النموذجي: الطرق الأوسع والشوارع الرئيسية والمشروعات التي تتطلب إضاءة أقوى ودعمًا هندسيًا
الخطوة التالية: راجع صفحة منتج SIRIUS للاطلاع على التكوينات التفصيلية وأرسل تخطيط طريقك للتوصية به.
سلسلة GALAXY

الأفضل لـ الطرق الريفية، وشوارع القرى، والمشروعات خارج الشبكة الحساسة من حيث التكلفة
ليست مثالية لـ الطرق الحضرية ذات المواصفات العالية التي تحتاج إلى مخرجات أقوى وتغطية أوسع
حالة الاستخدام النموذجي: الطرق الثانوية، والمناطق النائية، وعمليات النشر العملية حيث يكون التركيب السهل والصيانة البسيطة من الأولويات
الخطوة التالية: راجع صفحة منتج GALAXY وأرسل لنا ارتفاع العمود الخاص بك ومسافته للحصول على تطابق سريع.
سلسلة ALIEN

الأفضل لـ مشاريع مكافحة السرقة والحرم الجامعي والحدائق والأماكن شبه العامة
ليست مثالية لـ المشاريع التي يُفضل فيها فصل المكونات أو البنية المنفصلة أو المنقسمة
حالة الاستخدام النموذجي: البيئات العامة حيث المظهر الخارجي، والتصميم المضاد للسرقة، والهيكل المتكامل، والإخراج المتوازن كلها أمور مهمة
الخطوة التالية: راجع صفحة منتج ALIEN إذا كان مشروعك يحتاج إلى نظام إضاءة أكثر أمانًا وتكاملاً بصريًا.
سلسلة بولاريس

الأفضل لـ الطرق المجتمعية والمجمعات السكنية والتطورات المحلية الأقل ارتفاعاً
ليست مثالية لـ مشاريع الطرق الرئيسية التي تتطلب مواضع تركيب أعلى أو تغطية أقوى للطرقات
حالة الاستخدام النموذجي: الشوارع المجتمعية والمشاريع المسورة والطرق العامة المحلية حيث يفضل التصميم المتكامل المدمج
الخطوة التالية: راجع صفحة منتج POLARIS وأخبرنا بارتفاع التركيب واللكس المستهدف للحصول على توصية سريعة.
For a project-based recommendation, send us your road width, pole height, pole spacing, target lux, project location, autonomy target, operating schedule and quantity. Our team can recommend the most suitable integrated solar street light series and provide datasheets, IES/LDT files and RFQ support.
هل تحتاج إلى توصية أسرع؟ أرسل لنا نوع طريقك وارتفاع العمود والمسافة بين الأعمدة والكمية المستهدفة والكمية المستهدفة للحصول على توصية على أساس المشروع.
الدعم الهندسي لمشاريع الهندسة والمشتريات والبناء والمشتريات والإنشاءات والمشاريع البلدية والمناقصات
تدعم Inlux Solar مشتري المشاريع بالملفات الهندسية والوثائق التي تساعد على الانتقال من تقييم المنتج إلى تقديم العطاءات وتخطيط التركيب.
أوراق بيانات لكل سلسلة
احصل على أوراق البيانات الفنية المستندة إلى التكوين لكل من SIRIUS وGALAXY وAlIEN وAllien وPOLARIS لدعم مقارنة المنتجات والمراجعة الداخلية.
ملفات القياس الضوئي IES/LDT
Request photometric files for DIALux, AGi32, and lighting evaluation workflows.
التوصية القائمة على المشاريع
شارك عرض الطريق، وارتفاع العمود، والمسافة بين الأعمدة، والتباعد، واللوكس المستهدف، والموقع للحصول على توصية بأنسب سلسلة.
المساعدة في المناقصات وطلبات تقديم العروض
ندعم فرق المشروع بتوثيق المنتجات، وتأكيد المواصفات، وإعداد عروض الأسعار للمشاريع البلدية والتجارية.

المواصفات ومقارنة الطرازات
قارن بين سلسلة مصابيح الشوارع الشمسية المتكاملة حسب التطبيق، وارتفاع التركيب، ومستوى الخرج، والدعم الهندسي. يعتمد الطراز المناسب على نوع الطريق، والمسافات، وهدف الإضاءة، وبيئة المشروع - وليس القوة الكهربائية الاسمية وحدها.
| السلسلة | الأفضل لـ | نوع المشروع النموذجي | ارتفاع العمود النموذجي | تحديد موضع الإخراج | الميزة الرئيسية | الملفات الهندسية | الخطوة التالية |
|---|---|---|---|---|---|---|---|
| SIRIUS | الطرق السريعة والطرق الرئيسية | المناقصات البلدية، والطرق الشريانية، ومشاريع الإنارة التجارية ذات الطلب العالي | تطبيقات الارتفاعات العالية للتركيب | إضاءة الطرقات ذات الإنتاجية العالية | إضاءة أقوى ودعم هندسي جاهز للمشاريع | ورقة البيانات / IES / LDT / دعم التخطيط | عرض SIRIUS |
| غالاكسي | الطرق الريفية وشوارع القرى | الطرق القروية والطرق الثانوية والمنشآت النائية خارج الشبكة | إنارة طرق متوسطة الارتفاع | إضاءة طرق عملية خارج الشبكة | استقلالية يمكن الاعتماد عليها وتركيب مبسط | ورقة البيانات / IES / LDT / دعم التخطيط | عرض غالاكسي |
| الفضائيين | الإضاءة المضادة للسرقة في الأماكن العامة | الحدائق والممرات والحرم الجامعي وإضاءة المناظر الطبيعية العامة | ارتفاعات تركيب منخفضة إلى متوسطة | إضاءة متوازنة للبيئات العامة | تصميم مضاد للسرقة، ومظهر نظيف ومتكامل وراحة بصرية | ورقة البيانات / IES / LDT / دعم التخطيط | عرض ALIEN |
| بولاريس | المجتمعات والطرق المحلية | الطرق المجتمعية، والمجمعات السكنية المسوّرة والمشاريع المحلية والمشاريع منخفضة الارتفاع | تطبيقات الارتفاعات المنخفضة للتركيب | إضاءة منطقة مدمجة مدمجة مدمجة | نشر بسيط وتصميم مدمج ملائم للمشروع | دعم ورقة البيانات/التخطيط | عرض بولاريس |
هل تحتاج إلى توصية أسرع؟ شاركنا نوع طريقك وارتفاع العمود والمسافات بين الأعمدة والسطوع المستهدف وكمية المشروع، وسيقترح فريقنا أنسب سلسلة من الأعمدة.
The ranges below are a comparison reference, not a final supply specification. Confirm lamp power, lumen output, solar-panel rating and battery capacity together on one dated configuration sheet before ordering. Lamp wattage and solar-panel wattage are different ratings; do not combine values from different model versions for a tender.
| السلسلة | Lamp Power | التدفق الضوئي | ارتفاع العمود | LiFePO4 Battery | الألواح الشمسية |
|---|---|---|---|---|---|
| سيريوس (INL-AIO9) | 80–150 W | 9,500–28,500 lm | 7–15 m | 40Ah/12.8V–70Ah/25.6V | 130–400 W |
| كائن فضائي (INL-AIO5) | 30–120 W | 3,700–12,040 lm | 5-12 m | 256–768 Wh | 60–180 W |
| بولاريس (INL-AIO2) | 30–120 W | 3,700–12,040 lm | 5-12 m | 256–768 Wh | 60–180 W |
| المجرة (INL-AIO6) | 20–80 W | 2,280–8,500 lm | 4-8 m | 10–40 Ah/12.8V | 50–120 W |
All series share: 3000K–6500K CCT · Type II/III distribution · MPPT controller (10–20A) · up to 15 h/night · up to 7 days rainy-day backup · IP66/IK09 · −20 °C to 65 °C · >120 km/h wind resistance · 10-year-plus design life · LED chips by series: SIRIUS and GALAXY use 7070; ALIEN and POLARIS use 5050.
What Affects All-in-One Solar Street Light Price?
For B2B and municipal projects, all-in-one solar street light price should not be judged by lamp wattage alone. The quote changes with battery capacity, solar panel size, LED efficacy, controller logic, motion-sensor mode, housing material, pole height, lighting schedule, autonomy days, IES layout requirements, certifications, order quantity, packaging, and shipping.
Use the price discussion as an RFQ checklist, not a generic online price list. Two fixtures with the same nominal wattage can perform very differently if one has a larger LiFePO4 battery, stronger solar input, verified photometric files, or a project-specific dimming schedule. Send Inlux Solar the road width, pole height, spacing, target lux, location, autonomy target, and quantity to receive a project-based recommendation.
Compare the Operating Profile, Not Just the Wattage
Two all-in-one solar street light quotations can both say “50 W, 10 hours” while describing different operating profiles. Put the actual power at each scheduled level beside the price. The example below is illustrative, not an Inlux model specification, test result or recommended lighting schedule.
| Comparison item | Illustration A | Illustration B |
|---|---|---|
| Advertised maximum LED power | 50 W | 50 W |
| Operating profile | 50 W for 10 hours | 50 W for 2 hours, then 20 W for 8 hours |
| LED-load arithmetic | 50 × 10 = 500 Wh | (50 × 2) + (20 × 8) = 260 Wh |
These profiles do not provide an equivalent lighting service merely because the maximum wattage is the same. Calculate Wh by multiplying actual power by time in each interval, then adding the intervals. A controller dimming percentage is not automatically the same percentage of electrical power or illuminance.
The figures exclude controller and wiring losses, temperature effects, battery aging and reserve. They are not battery or PV sizes. Before comparing prices, require the quoted operating profile and the lighting calculation for each scene, then check the separate energy design against the site and required autonomy.
Request an all-in-one solar street light RFQ review
التطبيقات الموصى بها
عادةً ما يتم اختيار مصابيح الشوارع الشمسية المتكاملة للمشاريع التي يكون فيها التركيب المبسط وتقليل الأعمال المدنية والتحكم المتكامل في النظام من الأولويات.
إنارة الطرق السريعة
مناسبة لمشاريع مختارة للطرق السريعة والطرق الرئيسية التي تتطلب أنظمة إضاءة شمسية متكاملة مع دعم ضوئي قائم على المشروع.
إنارة الطرق والشوارع
تُستخدم للطرق البلدية والشوارع الثانوية ومشاريع الطرق العامة التي تتطلب نشرًا فعالاً وأداءً يمكن الاعتماد عليه خارج الشبكة.
إضاءة مواقف السيارات
مناسب تماماً للمناطق التجارية ومواقف السيارات العامة حيث يكون الإخراج المتوازن والمظهر النظيف وتقليل أعمال الحفر من الأولويات الرئيسية.
إضاءة مخيم اللاجئين
مثالية للمشروعات الإنسانية سريعة الانتشار والمشروعات خارج الشبكة حيث تكون سرعة التركيب والاستقلالية والصيانة المبسطة مهمة.

Why Project Buyers Choose Inlux Integrated Solar Street Light (All-in-One Systems)
صُممت أنظمة Inlux الشمسية المتكاملة لمشاريع القطاعين التجاري والعام حيث يكون التركيب المبسط والاستقلالية المستقرة والوثائق الجاهزة للهندسة أكثر أهمية من مطالبات القوة الكهربائية الاسمية.
تركيب أسرع
تقليل الكابلات والحفر في الخنادق والتجميع في الموقع لعمليات النشر خارج الشبكة وعمليات النشر الحساسة للعمالة.
مكونات أساسية من الدرجة التجارية
بطاريات LiFePO4 من الدرجة A، ووحدات تحكم MPPT، ووحدات LED فعّالة، وأغطية مقاومة للعوامل الجوية.
الدعم الهندسي القائم على المشاريع
صحائف البيانات، وملفات IES/LDT، والمساعدة المتعلقة بالتخطيط للتقييم والتخطيط.
مصممة لتنفيذ المشاريع الحقيقية
مناسبة للطرق البلدية، والشوارع الريفية، والحرم الجامعي، والحدائق، والمجمعات السكنية.
What Is an Integrated Solar Street Light?
An integrated solar street light, also called an all-in-one solar street light, combines the solar panel, LiFePO4 battery, LED module, MPPT controller, sensors and housing into one compact fixture. Compared with split-type systems, it reduces external cabling and can simplify installation. Final selection still depends on road width, pole height, spacing, target lux, autonomy days, local solar conditions and maintenance access.
For fast-deployment roads, campuses, parks, and community projects, all-in-one systems can reduce trenching and simplify installation. For larger roadway projects that need separated panels, larger battery capacity, or more flexible component placement, compare الكل في اثنين من مصابيح الشوارع بالطاقة الشمسية و مصابيح الشوارع الشمسية من النوع المنفصل before finalizing the RFQ.
- Best fit: rural roads, community streets, campuses, parks, parking areas, and selected municipal roads where simplified installation matters.
- Check carefully: high-speed roads, high mounting positions, long autonomy requirements, shaded sites, or projects that need large separated components.
Integrated Solar Street Light vs All-in-Two vs Split Type
Choose the system architecture according to road class, installation conditions, autonomy requirements, and maintenance access—not wattage alone.
| System type | Best fit | التركيب | Main advantage | Main limitation | Inlux option |
|---|---|---|---|---|---|
| Integrated / All-in-One | Rural roads, community streets, campuses, parks and parking areas | Lowest cabling and civil-work requirement | Fast deployment and compact fixture design | Component space and system capacity are limited by the fixture design | مصابيح الشوارع بالطاقة الشمسية الكل في واحد |
| الكل في اثنين | Highways, arterial roads and projects needing more panel-placement flexibility | More installation steps than All-in-One | More flexible solar-panel positioning | More components and installation coordination | مصابيح الشوارع بالطاقة الشمسية الكل في اثنين |
| نوع التقسيم | Higher-capacity systems, long-autonomy projects and difficult site conditions | Separate components require more design and installation work | More flexibility for panel, battery and lighting-system sizing | Higher installation and maintenance complexity | مصابيح الشوارع بالطاقة الشمسية من النوع المنفصل |
Will an All-in-One Solar Street Light Fit the Proposed Pole Position?
A fixture can fit the pole yet fail the site. The light must cover the intended road surface while the panel collects enough sunlight at its actual installed angle. Check those two tasks together before choosing an integrated configuration.
| Site-fit question | Evidence that resolves it | If the proposed arrangement cannot satisfy it |
|---|---|---|
| Can the panel and the light face the required directions? | One installation drawing showing the proposed bracket, luminaire aiming and panel plane—not an unrelated catalogue picture. | Reassess the mounting arrangement or compare a separated-panel architecture; do not assume every all-in-one model adjusts in the same way. |
| Is the panel clear of nearby shade? | A site review that includes trees, roofs, signs and other obstructions around the actual pole position. | Move or redesign the installation where feasible. A different LED wattage does not remove a shadow from the panel. |
| Does the solar estimate match the installed geometry? | A solar assessment using the proposed panel orientation and tilt, with the relevant seasonal conditions. | Recheck the configuration rather than substituting an annual optimum angle the fixture cannot actually achieve. |
| Can the installed unit be maintained? | The selected variant’s service instructions and access plan, including the ability to restore the approved mounting position. | Resolve the access method or choose a more suitable configuration before committing to that location. |
A useful distinction: road direction is not panel direction
Turning a fixture to improve road coverage can also change panel orientation if those adjustments are coupled in the selected design. Confirm what moves independently on the actual variant. For SIRIUS, GALAXY, ALIEN or POLARIS, use the matching installation drawing rather than transferring a feature from another series.
The European Commission’s PVGIS methods documentation explains the importance of the panel plane and the limits of its shading model. A terrain-horizon calculation does not clear nearby trees or buildings. Site shading and mounting feasibility still need a local check.
For a project recommendation, send the road width, pole height, spacing, target lux, location, autonomy target and quantity to the Inlux Solar engineering team.
لماذا يعمل مشترو المشاريع مع Inlux Solar
- مراجع المشروع العالمية: عرض المشاريع
- مواد التحقق: عرض الشهادات وبراءات الاختراع
- الإرشادات الفنية: مركز الإرشادات المفتوحة
- المواصفات، ومراقبة الجودة، ومواد طلب عروض الأسعار: مركز الموارد المفتوحة
- دعم سير عمل المشتريات: Open solar street light buyer’s guide hub
GALAXY All-in-One Solar Street Lights in Field Projects
Abéché, Chad: off-grid rural route


- Published project scope
- 165 AIO6 all-in-one solar street light sets.
- Installation responsibility
- Local contractor; a single-side route arrangement is recorded.
- Useful procurement reference
- Equipment supply and local installation were separate parts of the project. Review the route drawing and installation responsibilities with the proposed configuration.
Zambia: small-town road lighting


- Published project scope
- 50 GALAXY all-in-one solar street lights supplied through an EPC contractor.
- Installation responsibility
- The client’s team installed the equipment on site.
- Useful procurement reference
- The project record covers different road surfaces and pole arrangements. A new site still needs its own layout and energy review rather than a copied wattage.
These references document GALAXY/AIO6 deployments, not every series in this collection. Project photos and historical configurations do not establish the photometric performance or autonomy of a new quotation.
Manufacturer Checklist for Distributor, EPC, and Municipal Buyers
Before choosing an all-in-one solar street light manufacturer, verify the supplier behind the product, not only the fixture photo. For distributor, EPC, and municipal projects, request engineering files, factory capacity evidence, warranty terms, and project references before comparing final quotations.
- Factory capacity: Inlux Solar operates a 28,000 m2 factory with 20,000 sets/month capacity.
- Project proof: 300,000+ total units delivered across 60+ countries and 1,000+ projects.
- الدعم الهندسي: request datasheets, IES/LDT files, layout review, and model selection support before tender submission.
- Quality evidence: check certifications, warranty terms, battery specification, controller logic, housing protection, and maintenance access.
- RFQ clarity: confirm road width, pole height, spacing, target lux, operating schedule, autonomy days, quantity, destination, and project deadline.
For manufacturer qualification or distributor sourcing, review the الشركة المصنعة لمصابيح الشوارع بالطاقة الشمسية page or send your all-in-one solar street light project details.
هل تحتاج إلى المزيد من دعم الاختيار؟
- Explore the commercial solar street light hub
- اقرأ دليل مقاول الإضاءة الشمسية الكل في واحد لمقاول الإضاءة الشمسية
- Municipal solar street lighting guide — specification steps, pole heights, and example configurations for city projects.
- Ask Inlux engineers for an all-in-one project recommendation
الأسئلة المتداولة
كيف يمكنني الاختيار بين SIRIUS و GALAXY و ALIEN و POLARIS؟
Inlux offers four all-in-one series matched to project scale. GALAXY (INL-AIO6) is the cost-optimized choice for rural roads, village streets, and community projects, covering 20–80W with 2,280–8,500 lumens on 4–8 m poles. ALIEN (INL-AIO5) suits parks, resorts, and modern cityscapes with an anti-theft design, 30–120W and 3,700–12,040 lumens. SIRIUS (INL-AIO9) is the high-power option for highways, arterial roads, and tenders, delivering 80–150W and 9,500–28,500 lumens on 7–15 m poles with optional CCTV/IoT. POLARIS (INL-AIO2) shares ALIEN’s specs in a compact housing for community and local roads. All four use LiFePO4 batteries, MPPT controllers, IP66/IK09 protection, >120 km/h wind resistance, and a 10-year-plus design life. Choose by required brightness and mounting height; our engineers confirm the exact model with an IES/DIALux layout for your road width and pole spacing.
What is an Integrated Solar Street Light?
An all-in-one solar street light integrates the solar panel, LiFePO4 battery, LED module, MPPT controller, and sensor into one compact pole-top fixture. Because there is no separate battery box or external cabling, installation needs no trenching and is far faster than a split-type system. Each unit charges by day, stores energy, and runs autonomously at night—Inlux models deliver up to 15 hours of lighting per night and up to 7 days of rainy-day backup. Inlux all-in-one units span the GALAXY, ALIEN, SIRIUS, and POLARIS series, covering 20–150W and 2,280–28,500 lumens, with 3000K–6500K color temperature, Type II/III distribution, IP66/IK09 protection, and a 10-year-plus design life. They are commonly specified for rural roads, community streets, parking areas, parks, and roadway projects where speed of deployment and minimal civil works matter most.
ما هي التطبيقات الأفضل لمصابيح الشوارع الشمسية المتكاملة؟
All-in-one solar street lights are best for projects that need reliable night lighting without grid power or trenching. Typical applications include rural and village roads, community and residential streets, parking lots, parks and campuses, perimeter and security areas, refugee camps, and selected highway or arterial sections. The right series depends on brightness and pole height: GALAXY (2,280–8,500 lm, 4–8 m) fits rural and community roads; ALIEN (3,700–12,040 lm, 5–12 m) suits parks and urban areas with its anti-theft design; SIRIUS (9,500–28,500 lm, 7–15 m) handles highways and high-demand roadways. Every unit provides up to 15 hours per night, up to 7 days of rainy-day autonomy, IP66/IK09 ingress protection, and >120 km/h wind resistance. Inlux supplies IES/LDT files and DIALux layouts so specifiers can confirm lux levels and uniformity before ordering.
متى يجب أن يختار مشروع ما مصابيح الشوارع الشمسية المتكاملة بدلاً من مصابيح الشوارع الشمسية المنفصلة؟
Choose all-in-one when fast installation, minimal cabling, and simplified maintenance are the priorities. Because the panel, LiFePO4 battery, controller, and LED are integrated into a single pole-top unit, there is no battery box to mount or wire, so deployment is quicker and civil works are lower—ideal for rural roads, community streets, parking areas, and parks. Inlux all-in-one models cover 20–150W and 2,280–28,500 lumens on 4–15 m poles. Choose split-type instead when a project needs higher power, taller mounting heights, larger battery autonomy, or a separately positioned panel for shading or sun-angle reasons—our APOLLO, VESTA, and MARS split series serve those cases. Rule of thumb: all-in-one for speed and standard road classes; split-type for maximum power, custom autonomy, or difficult sun-angle sites. Inlux can model both options with a DIALux layout so you compare lux, uniformity, and cost before deciding.
هل يمكن لشركة Inlux Solar توفير ملفات IES ودعم DIALux؟
Yes. Inlux Solar provides IES/LDT photometric files, technical datasheets, and DIALux layout support for qualified municipal, commercial, and EPC projects. With the IES/LDT file for the selected series—GALAXY, ALIEN, SIRIUS, or POLARIS—your lighting designer can model illuminance (lux), uniformity, and pole spacing for the exact road width and class before ordering, reducing specification risk on tenders. We can also recommend a model and mounting height for your project: for example, SIRIUS covers 9,500–28,500 lumens at 7–15 m for highways and arterials, while GALAXY covers 2,280–8,500 lumens at 4–8 m for rural and community roads. All series use Type II/III distribution and 3000K–6500K color temperature. Send your road dimensions and target lux level, and our engineering team will return a DIALux layout, datasheet, and IES files to support your RFQ.
هل البطاريات قابلة للاستبدال؟
All Inlux all-in-one models use LiFePO4 lithium batteries, chosen for long cycle life and stable performance across a -20°C to 65°C operating range, supporting a 10-year-plus design life with up to 7 days of rainy-day backup. Battery capacity scales with the model—from 10Ah/12.8V on entry GALAXY units to 70Ah/25.6V on high-power SIRIUS units (ALIEN and POLARIS use 256–768Wh packs). Field battery replacement is supported on the GALAXY, ALIEN, and SIRIUS series, subject to the specific configuration and safe service access; POLARIS uses a sealed compact housing and is serviced as a unit. For long-term municipal and EPC deployments, our team advises on the most suitable configuration based on service access, expected lifecycle, and operating conditions, and can specify maintenance-friendly options where field replacement is required. Contact Inlux with your service plan and we will confirm the right battery and maintenance approach.
هل تحتاج إلى مساعدة في اختيار مصباح الشارع الشمسي المتكامل المناسب؟
أرسل لنا عرض الطريق، وارتفاع العمود، والمسافة بين الأعمدة، والتباعد، واللوكس المستهدف، وموقع المشروع، والكمية. يمكن لفريقنا أن يوصي بسلسلة الكل في واحد الأنسب ويدعم مشروعك بأوراق البيانات وملفات IES/LDT والوثائق الجاهزة لطلب تقديم العروض.
