Iluminação de estradas do parque industrial de Omã

Inlux Solar completed an Oman industrial park road lighting project in August 2024, supplying 100 sets of INL-SPL01 solar pole lights for internal roads. The project used 120W LED luminaires on 10 m Q235 poles, with a 25.6V 60Ah battery specification and IP66/IK09 protection for outdoor industrial use.

For EPC and industrial-zone buyers, the value of this case is not only the product model. It shows how quantity, pole height, LED output, battery sizing, and installation planning should be aligned before an RFQ is finalized.

Site Application & Lighting Requirement

Industrial park internal roads need consistent guidance for service vehicles, staff movement, and nighttime logistics. In this project, the lighting layout was built around 10 m poles and 120W LED output to support road-level visibility across the site circulation routes.

For similar industrial zone and factory lighting layouts, buyers should provide road width, lane count, pole spacing, operating hours, and site drawings before final configuration. These inputs help determine whether a solar pole light layout, split type system, or another solar street light solution is the better fit.

Why This Configuration Was Selected

The INL-SPL01 configuration matches the project requirement for pole-integrated solar road lighting. The confirmed specification includes 120W LED power, 180lm/W efficacy, 6000K color temperature, a 25.6V 60Ah battery specification with a 3,500-cycle rating, Q235 10 m poles, and IP66/IK09 protection.

This combination is suitable for industrial road projects where buyers need an off-grid lighting system with defined pole height, outdoor protection, and a clean roadside profile. The solar pole light format also helps buyers keep the solar module, lighting arm, and pole system coordinated as one project package.

Procurement Value for Similar Buyers

For EPC buyers, the main procurement risk is incomplete project data. A quote based only on wattage is usually not enough for an industrial road lighting project. The RFQ should include application type, required quantity, pole height, LED wattage, battery capacity, IP/IK rating, installation responsibility, and shipping schedule.

This project record gives similar buyers a practical reference point for a 100-set industrial park road lighting order. It can help reduce quote revisions, clarify the bill of materials, and make the technical discussion more useful before production and delivery planning begin. Buyers preparing a new inquiry can also review Inlux Solar’s solar lighting resources before submitting project drawings or site data.

What Similar Project Buyers Should Confirm

• Road width, lane count, target lighting area, and expected pole spacing.
• Required pole height, pole material, foundation conditions, and truck access for installation.
• LED wattage, color temperature, battery capacity, autonomy target, and any dimming requirement.
• Local wind, heat, dust, corrosion, and impact-resistance requirements for outdoor operation.
• Quantity, delivery schedule, container planning, and responsibility for installation or commissioning.

Related Solar Lighting Solutions

For projects with a similar roadside profile, start with the INL-SPL01 vertical solar pole light and the broader solar pole light range. If the project needs a different battery layout, pole design, or application environment, compare it with other sistemas solares de iluminação pública before finalizing the RFQ.

PERGUNTAS FREQUENTES

What type of solar light was used for this Oman industrial park project?

The project uses INL-SPL01 solar pole lights for internal road lighting, with 120W LED luminaires and 10 m Q235 poles.

How many lights were supplied for the industrial park road lighting project?

The project uses 100 sets of INL-SPL01 solar pole lights for the Oman industrial park internal roads.

Why is INL-SPL01 suitable for industrial park internal roads?

The pole-integrated solar design supports roadside installation where buyers need an off-grid lighting system with a clean pole profile and controlled exposed panel structure.

What specification details should similar EPC buyers confirm before ordering?

Buyers should confirm road width, pole spacing, pole height, LED wattage, battery autonomy, IP/IK requirements, installation responsibility, shipping schedule, and local site conditions.

Can this configuration be adapted for other industrial zones?

Yes. Similar projects can start from the same solar pole light family, then adjust LED power, battery capacity, pole design, and lighting layout after project data is reviewed.