Inlux Solar has shipped a project-specific solar explosion-proof floodlighting configuration to the United Arab Emirates for planned use aboard a vessel. The supplied configuration specifies a 200W floodlight, a 550W solar panel, and a 25.6V, 90Ah battery.
A configuration for an on-board lighting project
The project brings the light, solar panel, and battery together as a system for the customer’s intended installation. Factory photographs show the assembled lighting equipment, the luminaire switched on indoors, a coating-thickness measurement, and wooden crates prepared for transport.
Shipboard projects call for a careful review of the installation position and operating conditions. Panel exposure, available mounting space, salt-laden air, vibration, cable routing, and the location’s hazardous-area classification can all affect the final design. The vessel operator and project engineers must confirm the required approvals and whether the exact supplied configuration is suitable for its designated position before installation.
Inlux Solar’s explosion-proof solar lighting range shows the broader product family. The 200W, 550W-panel, 25.6V/90Ah configuration described here is specific to this shipment; buyers should request its own datasheet and applicable certification documents rather than assume that the specifications of a standard online model apply. Our hazardous-area lighting guide explains the site information needed to select equipment for classified locations.
Discuss a similar requirement
If you are sourcing solar lighting for a vessel or another demanding outdoor site, contact Inlux Solar with the proposed mounting location, operating hours, lighting target, available solar exposure, hazardous-area classification if applicable, and the project approval requirements. These details allow our team to review the configuration and prepare a relevant proposal.
